Adjusting Calibration
How to adjust the ratio of whisky & soda
Open the small black cap at the top of the handle lever by hooking it into the gap with a thin flathead screwdriver.
Unscrew the screw at the top of the handle lever with a Phillips screwdriver.
Remove the handle lever and remove the plastic valve cover.
Pour only soda to time how long it takes to pour 6 oz soda from the machine with a timer (usually it takes 5-6 seconds).
Once you know how long it takes to pour 6 oz of soda, adjust the calibration to reflect the same amount of time it takes to pour 2 oz of spirit. This will achieve 1 part spirit to 3 parts soda ratio.
Pour highball mixture and taste to make sure that you are getting the proportion you want.
ℹ️
The amount of whisky can be adjusted by turning the Valve using a 4 mm Allen wrench in the hole on the left side of the dispenser.
